New Angle

 The Royal Canadian Navy's base in Halifax, HMC Dockyard, is served by a small fleet of tugs. They are not commissioned naval vessels, but are classed as auxiliairies, and are operated by civilian crews. There are two classes of tugs, the Glens and the Villes (also known as "pups").

When not berthing ships and doing other chores the tugs can be seen from the Angus L. Macdonald bridge that spans the habour almost directly over their basin.

 

This week, May 15, I saw one of the tugs from a different angle - and much closer - when it was tied up at Dominion Diving's facility in Dartmouth Cove. It was probably undergoing some maintenance as each of the three Glen class tugs in Halifax have been undergoing refits.

 

The Glenbrook YTB 643 was built in 1976 and is a 1750 bhp Voith-Schneider tractor. 

The tugs have been meticulously maintained, but are due for replacement. The new tugs are under construction at the Industrie Océan shipyard in Ile-aux-Coudres, QC. The first two tugs, the Haro and Barkerville were delivered to HMS Dockyard in Esquimalt, BC last year and the second two are due for delivery to Halifax this year. They are to be named Canso and Stella Maris - more on these when they arrive.

Each dockyard will receive two tugs to replace the three tugs and a fireboat originally in service.  

.

 

Tugs from above - Updated

A walk out on the Angus L. Macdonald Bridge this afternoon allowed for some interesting angles on various tugs.

First was a general view of two of HMC Dockyard's  Glen tugs awaiting their next assignment.

 Glenside YTB 643 and Glenbrook YTB 644 alongside. They are Voith tractors built in 1976-1977.

The third tug, Glenevis YTB 642, was apparently elsewhere [see Upate below], possibly on refit. Construction work on the replacement tugs of this class will begin soon at Industrie Océan in Ile-aux-Coudres, QC. Unfortunately the powers that be think that only two tugs will be needed in Halifax, and two in Esquimalt, to replace five tugs and two firefloats.

The current tugs are the second generation of Glen tugs in the RCN (the first generation were built during World War II), and using many of the same names. I hope the new tugs will maintain the tradition. [see footnote]

I have photographed McNally Construction's J.F.Whalen from every angle but this one since it was built in 2013 by Chantier Forillon in Gaspé,QC. In this view the tug is sailing light and appears to have an electric arc welder mounted on deck just aft of the house. The 670 bhp (492 kW) twin screw tug has a demountable house for road transport and push knees for scow work.
It is registered in Toronto, ON, although McNally is headquartered in  Hamilton, ON.

Spitfire III heads north to assist in docking a container ship. One of three 5300 bhp (4000 kW) (70 tonne BP ahead, 66 astern) tugs built by Eastisle, Georgetown PE in 2007, it was designed to berth LNG tankers in the open roadstead off Saint John, NB. That facility does not need full time tugs so this one and Atlantic Bear work out of Halifax and make trips to Saint John when needed. The third tug Atlantic Beaver remains in Saint John.
It is fitted with a heavy duty berthing winch forward and a third "lip" of tubular fendering around the bow. It also carries a towing winch aft and is rated LR FiFi1 with water spray.

Footnote: 
I was reminded recently about the first Glendyne, (YTB 503) built in 1945 by Russel Brothers, Owen Sound, ON. On February 15, 1957 while assisting in docking HMCS Magnificent, the tug was girted [pulled over by its own towing line] when the aircraft carrier went astern, and capsized with the loss of two lives.The skipper and four other crew members were recovered alive.
An inquiry found no negligence, but a misunderstanding about instructions to the tug lead to the tow line becoming so taught that neither tug nor ship could release it in time.
The aircraft carrier HMCS Magnificent was returning from duties with the UN Emergency Force in Suez.

Glendyne was recovered from 80 feet of water off HMC Dockyard by navy divers and Foundation Maritime's crane barge Foundation Scarboro on February 19. The tug returned to service and was retired in 1979. The builder's plate has been preserved, apparently at the naval museum in Halifax. The hull was sunk off Shearwater for diver training for the Fleet Diving Unit Atlantic, but I have no idea if it is still there. Her wooden wheelhouse served as a ticket office at the Maritime Museum of the Atlantic wharf in Halifax.

 Two first generation Glens laid up retired but not yet de-stored at HMS Dockyard in 1977.

The second Glendyne, built in 1975 by Yarrow in Esquimalt, is one of two second generation Glens based at HMC Dockyard, Esquimalt and will be replaced under the new program, along with its west coast running mate Glendale.

For more on the first generation Glens see:
http://tugfaxblogspotcom.blogspot.com/2013/05/first-generation-glen-class-tugs-of-rcn.html


Update:
Thanks to readers: Glenevis is in St. John's, NL for ship berthing duties for visiting Canadian and foreign warships. Another reason why only two tugs in Halifax won't do!

.

Southwestern (Nova Scotia) tugs

A couple of loops around southwestern Nova Scotia in the past few weeks turned up a bit of tug activity.

June 2 Lunenburg 

At Lunenburg Theodore Too was in port for a tune up before heading to its new summer base at Saint John, NB. It arrived there June 7.

 That looks like a new hard hat on the dock.

Also at the Lunenburg Foundry and Engineering's dock the basic tug  Mascot. It has an aluminum deckhouse, complete with an oar mounted on the cabin - not sure how much bollard pull they would achieve using that.

June 21 Shelburne

Shelburne Shipyard had two tugs alongside in addition to its own workboat.

 In the background the Canadian naval tug Glenbrook which arrived June 19 for refit. And alongside is SSR2 the former Stenpro III , which was transferred from Liverpool when Irving Shipbuilding Inc moved its operation to Shelburne.

 Undergoing a refit for Canadian service, the former Dutch naval tug Regge. At this time the  interior is being gutted to remove combustible material and fitting out new accommodations.

June 21 Meteghan River 

At the A.F. Thériault + Sons shipyard the much traveled Hudson Bay Explorer appears to be getting another makeover

The shallow draft tug/supplier was pre-fabbed by Vito Steel Boat + Barge Construction in Delta, BC in 1971 and was assembled in Hay River, NWT by Alberta Equipment Centre as Beaufort Sea Explorer for Arctic Transportation Ltd. After arctic service with several owners it was sold to Klynne Tugs (Lowestoft) Ltd and renamed Anglian Sea Explorer inn1992 and worked in the UK until returning to Canada in 1995 for Moosonee Transportation Ltd.

In 2003 it suffered a serious fire while on a slip in Wemindji, QC and was towed to St.John's where it was rebuilt from the main deck up. All new deckhouse and funnels changed the profile dramatically from its original Robert Allen design. Its original V-16 Cats, delivering 2250 bhp through two screws in nozzles, survived the fire and remained unchanged.

It then worked in Hudsons Bay, James Bay, and Voisey's Bay and on the St.Lawrence until 2006. It was then acquired by Peter Kiewit + Sons Ltd, along withe the barge The Pugwash and managed by their Marystown Shipyard. It also worked in Saint John, NB on the LNG terminal.

In 2017 Kelly's Cove Salmon Ltd, part of Cooke Aquaculture, bought the tug. I believe they had chartered it for some time prior. Now cocooned at Thériault's it will be interesting to see what it looks like when it is unveiled.

Ghosting through fog off Saint John, NB in 20007, the tug appeared to be carrying a payload of portable toilets.

Alongside and dried out at the tidal pier, Atlantic Tamarack was getting some TLC.

Built in Saint John in 1969 as Irving Tamarack the tug was originally assigned to the monobuoy serving Irving Oil's refinery. It has been working for Harbour Development Ltd for many years and usually attends the crane barge / dredge Cranemaster. That rig is in Shelburne for refit, so the tug is currently idled. Alongside it is what appears to be a modified seine skiff, which may be Thériault's own yard tug.

June 21 Digby

McNally Marine is carrying out some work at the ferry terminal and clearing away before the 5pm arrival of the Fundy Rose, the tug J.F. Whalen is hauling the crane barge Beaver Kay toward Digby harbour.

The tug was built in 2014 in Gaspé and is a 540 bhp twin screw vessel with push knees. It has a removable wheelhouse to make it truckable. 

The barge is former HMC Dockyard steam crane barge YD251 built in 1953 in Saint John and purchased by Beaver Marine and rebuilt in 1996. McNally purchased Beaver Marine but did not rename the barge. 

Visitors to Ship Central Eastern (home of Shipfax and Tugfax) may be treated to the sight of the barge's original name board, among other artefacts. It was rescued - with permission - from a dumpster, causing much amusement for the demolition crew.

This is the steam crane shortly before I retrieved the name board. (October 10, 1995)

.

Navy tugs at work

Canada's navy tugs are crewed by civilians, and operated by the Queen's Harbour Master. As Canadian Navy (Forces?) Auxiliary Vessels they are dedicated to navy work. This morning they were at work moving HMCS St.John's  from HMC Dockyard to pier 21.
Granville was in the lead with a tow line:

Next was Listerville under the bridge with a bow line:

Proving the power from the stern is Glenbrook:

Bringing up the rear was Merrickville with two Yokohama type fenders. While the other tugs turned the ship, the fenders were installed on the pier face:

Later in the morning other Dockyard small craft placed a containment boom around the ship.
Meanwhile the tug Glenside was inbound towing HMCS Shawinigan from refit in Shelburne, NS.

Navy Glens at Work

Canadian Naval auxiliary tugs Glenevis (left) and Glenbrook (right) await the arrival of HMCS Charlottetown to berth at the naval Dockyard on a breezy February 11.

There are three Glen class tugs based in Halifax (Glenside is the third.)

These distinctive vessels were built in 1977-78, and have dual Voith-Schneider propulsion. Although only rated at 1750 bhp, they do not need more power since most warships are relatively light displacement (and thin skinned!)